The elusive Ten-Year Pen

The Congregationalist, 8 Sep 1906, p. 321

In was in the first decade of the 20th century that the self-filling fountain pen came into its own. Scores of ingenious filling mechanisms were patented, many even making it into production -- though often not for long. One design that proved lasting was the sleeve or thumb-filler, in which a manually-depressed pressure bar was by various means made either accessible for filling or safely concealed for use.

One of the earliest sleeve-filling fountain pens was the Ten Year Pen. In this variation the back half of the barrel was the sleeve, sliding over a metal sac housing with a cutout for access to the pressure bar. The first advertisements appear in the last quarter of 1906. Most ran in religious periodicals such as The Congregationalist and Christian World, The Christian Advocate and Journal, The Church School Adjuster, and the Baptist Standard, but ads also are found in publications such as The Mercantile Adjuster, The American Review of Reviews, and The Etude (for music teachers). In all these early ads the company is listed as The Ten Year Guarantee Pen Company of Ansonia, Connecticut. The earliest mention of the company I have found is in The Missionary Herald of July 1906, where it is listed as having given a donation of $15 in May of that year.

Expositor and Current Anecdotes, Dec 1907, p. 146

From the end of 1907 there is no more mention of The Ten Year Guarantee Pen Company or Ansonia. The pen is henceforth styled "The Ten-Year Pen", and shown with a cap imprint identifying George B. Graff of Boston as "Manager" (F. M. Barton in the ad above was the publisher of the magazine, who in an arrangement common in that era was also a sales agent for the items advertised there). 

The Ecclesiastical Review, vol. 39, 1908

The George B. Graff Company was an established Boston manufacturer of stationery supplies such as paper fasteners and clamps. Adding a fountain pen to their line would not have been such a stretch; the original Ten Year Guarantee Pens surely were made under contract -- the area of Connecticut comprising Ansonia and Seymour was home to Day Rubber and had been a center of contract manufacture of hard rubber pens and pen parts for decades -- so however the transfer was effected, it would not have involved the kind of capital required for actual factory ownership.

Over the next few years Ten-Year Pen ads continue to appear in various publications, though without the pronounced evangelical slant of the original company's promotional efforts. After the end of the decade these ads drop away, though Graff continues to be listed as the seller of the Ten-Year Pen in stationery trade directories such as Walden's and Geyer's up through 1912 at least.

Gregg Writer, Sep 1915, pp. vii 

Gregg Writer, Oct 1915, p. iv 

The ads above clarify the later history of the Ten-Year Pen: renamed "The Dependable", taken over by Hermann Frederic Post, and moved from Boston to Chicago. Post continued to advertise The Dependable as late as 1921, still touting a ten-year guarantee. The last mention I can find is in the May 1928 American Stationer "Buyers' Classified Directory" -- but that list is so extensive and each entry so perfunctory that it is likely that at least some defunct or moribund companies ended up being included.

Ten-Year Pens aren't often seen, even by those who have been hunting in the company's home territories for years. Most examples are plain black hard rubber, though gold filled bands were advertised as an option. Several overlay examples are known in both gold filled and silver, the filigree overlays undoubtedly sourced from Heath. The pen shown here belongs to Gabriel Galicia Goldsmith, who generously gave permission to use his photos for this post.

There has been some confusion about the parentage of the Ten-Year Pen. As long ago as the 1990s collector lore was associating the pen with William I. Ferris, unlikely as that would have been given Ferris's central position at Waterman. Whether such a connection was posited in print, I have not been able to determine (it is not mentioned in the big Fischler and Schneider volumes, nor in the Pen Fanciers' Magazine). How it came about is easy to see, though. The patent date that appears on the pens and in advertisements is September 19, 1905, which is the issue date of Ferris's first sleeve-filler patent, US799897. Yet if one examines that patent it is clearly not relevant: it is for a one-piece barrel with an aperture, covered by a rotating sleeve with a matching aperture -- a design never used for Waterman-branded pens, but produced as Remex and Aikin Lambert models. There were at least three other fountain pen patents issued on that same date, however, with Robert W. Gorham's patent US800129 clearly being the one referenced in the Ten-Year Pen imprint.

One of the claims of Gorham's patent is shown in the image above. The text explains, "It is also the purpose of my invention to make the plunger more efficient by having a lug thereon within the aperture" -- that is, a projection attached to the pressure bar, making it easier to press down all the way. And sure enough, this lug is visible in the early Ten-Pen ads (the image below is a detail from the 1906 ad at the very top of this post).

So who was Robert W. Gordon? And who was behind the original Ten Year Guarantee Pen Company?  If I have the right Robert W. Gordon, he died quite young, and though mechanically inclined is not listed as involved in pen manufacture in any of the records found to date. This would suggest that he sold his patent, with others yet to be identified having been the ones who actually brought the Ten-Year Pen to market. Then there is the question of the priority of the sleeve-fillers made by Standard & Vulcanite in Brooklyn under Hamilton's patent US781649, issued February 7, 1905. Were the claims in this patent too narrow, allowing closely similar designs such as the Ten-Year Pen to avoid infringement by changing minor details, such as using an unsprung pressure bar, or a sliding barrel without a catch? All these questions are going to take some more digging -- ample material for a followup post.

Waterman’s “J” Pens: A Mystery Solved

For over 35 years Waterman collectors have puzzled over an extraordinarily rare model typically described as a slip-cap safety pen, with an end knob of distinctive form imprinted 1XJ (“X” denoting the nib size). Some have guessed that it was some sort of prototype or experiment. Few have given full consideration to how nonsensical a slip-cap safety pen would be.

Although the J-series pens do not appear in any known Waterman catalog, they are mentioned in both company and retailer advertisements and – most helpfully – in a Canadian instruction sheet that I found several years ago. The “J” stands for “jointless” and while the nib retraction mechanism is the same as that found on early Waterman safeties, the nib is only intended to be retracted for filling. Once the pen is filled the nib is extended and left that way until refilling is necessary. 

The first ads that mention Waterman’s Jointless date to the last quarter of 1909. The first that I could find appeared in September with all of the rest appearing in December. Many more followed in the first half of 1910 with only sporadic sightings thereafter. The last Waterman ad that I could find that mentions the Jointless is in the May 29, 1913 Geyer’s Stationer – though it does get a passing mention in 1915 in a published transcript of a Waterman executive’s lecture on sales. There it appears only at the tail end of a recounting of miscellaneous models outside of Waterman’s “active line”, suggesting that it was by then out of production but still in inventory or available on demand (American Stationer, vol. 77, May 22, 1915, p. 30).

Abraham & Strauss ad, Brooklyn Daily Eagle, 18 Oct 1909, p. 8; perhaps a soft launch – a limited test release – as no further mentions are to be found until regular mentions begin two months later.

Bookseller and Stationer (Canada), May 1910, p. 4

Ads and instructions only mention three sizes: 12J, 14J, and 15J. Examples of all three sizes are known, all in black hard rubber – though reportedly at least one in red hard rubber is extant. All examples that I have examined have the early internal mechanism with helical grooves cut into the barrel which make the nib carrier twist as it is extended and retracted. 

This mechanism was adopted by Waterman for their safety pens in 1908 to avoid infringing Peck & O’Meara’s patent 523,234, then held by the Modern Pen Company (A. A. Waterman), and appears to have been used only until that patent’s expiration in July 1911. Whether Jointless production continued after that date is an open question. Perhaps it did, for our instruction sheet also has a spare parts page where for both safety and jointless models “Interior Spirals” are listed – a term that could in no way be applied to the straight-track equivalents used in their  earlier versions.

So what was Waterman thinking? The goal was surely to compete with arch-rival Parker, whose own Jointless had been on the market since c. 1898. Parker’s version required the nib assembly to be pulled out manually from the front of the barrel, a process just as messy as dealing with ink residue at the joint of a conventional dropper-filled pen. Waterman’s version obviated that issue, but at the cost of making the pen as complicated as a safety without the benefits of a safety. And this right at the same time that Waterman brought out its sleeve-filler, a simple design which made filling yet cleaner and more convenient. Perhaps no surprise that the Waterman Jointless was so quickly forgotten.

NOTE: Some extant Jointless pens have unusual protrusions on top of their caps, which in at least some cases are made to be inserted into a matching recess in the turning knob (similar to certain Caw's safety models). I have yet to see any mention or illustration of this feature in contemporary advertisements, however.

Premature latex sac failure and ammonia

For quite a few years now pen collectors have been trying to determine why latex rubber ink sacs fail -- and in particular, why they sometimes fail so quickly. Certain inks have been implicated, and yet efforts to conduct controlled experiments have for the most part not succeeded in producing consistent results and clear conclusions (the exception being highly alkaline inks, which have long been known to attack sacs).

Some time ago I asked my old friend Peter Amis, longtime proprietor of the Pen Sac Company, if he could provide any insight into why newly-made sacs didn't seem to be holding up as well as those made in the 1950s and 1960s, but I never got a clear answer. Peter recently passed away, far too soon -- a huge loss to the pen community. During Peter's illness, Todd Eberspacher stepped in to help keep the Pen Sac Company going, eventually leading to an agreement to take the business over. 

Todd has shared with me much about what he has had to learn about the making of pen sacs. It turns out that environmental and workplace safety issues have led to major changes in how latex pen sacs are made, with the toxic solvents used in the past replaced by water-based solutions. This has affected durability in much the same way as the switch from oil-based to latex house paints. And the new formulations are in part activated by ammonia -- which I am told makes them particularly vulnerable to subsequent ammonia exposure.

The risks ammonia poses to gold nibs has already been documented at length here. That it is also bad for sacs has not been noted previously but should now be accepted as fact. Ammonia-containing pen flush products should not be used on either gold nibs or in pens with latex rubber sacs, including Vacumatic diaphragms. 

A Waterman prototype surprise

Many years ago I acquired a group of prototype Waterman Hundred Year pens, all of first year design but most in colors that never made it into production. Recently I finally got around to cleaning them up for proper photographic documentation, and inside the pen shown above there was an interesting surprise.

There was actually a bit of a clue beforehand -- "LEW" and "X" and "I" scratched into the bottom of the feed. Plus of course the pen's completely nonstandard color, an opaque metallic blue.

Nonetheless, there was no anticipating this. Incidentally, several of the pens in this prototype group came with #7 keyhole-vent nibs. As pre-production examples, they might well have been put together before nibs with the Hundred Year imprint had become available.

And here is a more complete view of the feed. At some point I'll have to look to see if a patent application was filed. 

While some of the pens in this group are pristine, such as the light green metallic example shown above, most had been carried and used, including the blue pen. It was undoubtedly a working prototype and not just a material trial.

Waterman desk set discovery

Inkwells are not a collecting focus for me, particularly those from the 20th century. When this one popped up on eBay, however, I made sure to put in a bid -- and to save photos from the listing, just in case. As things turned out it now resides at my shop. But why my interest in this one?

In large part because it retains its original label, identifying it as the product of the Jennings Brothers Manufacturing Company ("Artware of Distinction") of Bridgeport, Connecticut. 

In larger part, however, because of its clear affiliation with the desk base shown below -- a piece that I don't recall seeing in a catalog or ad, though they are not so rare that I haven't seen a few over the years.

It is widely known that fountain pen makers outsourced all sorts of components, with desk set bases being one of the most obvious examples. Yet we don't always know who actually made what, so this is a particularly fortuitous discovery. Note that the construction is of base metal with a thick gilt bronze surface layer -- well preserved in the inkwell, but with much peeling and losses on the desk base version. The base came with a matching rocker blotter and a set of corner squares to be attached to a desk pad. There surely were other accessories available, though it has been so long since I've seen other ensembles, I no longer recall what other pieces they comprised.

Jennings Brothers also produced a wide range of figurines, often found as bookends. It will be instructive to see how many also appear on catalogued Waterman bases without attribution.

Waterman pens with emblems

  

Back in the later 1990s I bought a collection of Waterman pens with emblems that had been assembled by Jim Krause, an eminent watch, clock, and pen dealer. Most have long since been sold and though I photographed all of them, most of the images were not kept in high resolution form. They are nonetheless a valuable visual record and I am sharing them here, along with some better photos of other Waterman emblems that have passed through my hands more recently.

 

 

 

 

 

Waterman 1919 catalog, p. 49.

1925 Waterman catalog: Reference Library: Waterman – Pen Collectors of America